Hubbell YQ100 Plus Y Adapter 100A 125/250 - 2 50A 125/250
Product Description
Hubbell YQ100PLUS - Safely powers a 100A, 125/250V AC boat from two 50A 125/250V AC receptacles at dockside - or - from a single 50A 125/250V AC receptacle acting as a single adapter.
Internal Logic Senses That:
Both plugs are fully engaged (i.e., one is not dangling loose while the other is plugged in) - or - the "A" leg plug is engaged to access a single 50A, 125/250V receptacle.
The polarity of the receptacle on the dock is correct (i.e., no mis-wiring of the hot and neutral wires).
The two receptacles are from correct phases.
Note: The YQ100PLUS Adapter must be plugged into two 50A, 125/250V AC receptacles that are on the same phase to achieve 100 amp, 125/250 volts power - or - the "A" leg 50A male into a single 50A, 125/250V AC receptacle to achieve 50 amp, 125/250 volts power.
THIS ADAPTER MUST BE CONNECTED TO AN ONBOARD, CENTER-TAPPED ISOLATION TRANSFORMER OR SHORE POWER CONECTOR. DO NOT USE THIS ADAPTER IF SUCH A TRANSFORMER OR CONVERTER IS NOT AVAILABLE
Internal Logic Senses That:
Both plugs are fully engaged (i.e., one is not dangling loose while the other is plugged in) - or - the "A" leg plug is engaged to access a single 50A, 125/250V receptacle.
The polarity of the receptacle on the dock is correct (i.e., no mis-wiring of the hot and neutral wires).
The two receptacles are from correct phases.
Note: The YQ100PLUS Adapter must be plugged into two 50A, 125/250V AC receptacles that are on the same phase to achieve 100 amp, 125/250 volts power - or - the "A" leg 50A male into a single 50A, 125/250V AC receptacle to achieve 50 amp, 125/250 volts power.
THIS ADAPTER MUST BE CONNECTED TO AN ONBOARD, CENTER-TAPPED ISOLATION TRANSFORMER OR SHORE POWER CONECTOR. DO NOT USE THIS ADAPTER IF SUCH A TRANSFORMER OR CONVERTER IS NOT AVAILABLE