Lenco 101XD Extreme Duty Actuator - 12V - 2-1/4" Stroke - 5/16" Hardware
Product Description
101 XD Extreme Duty Actuator
Part # (Superseded #)
#15055-001 (101 XD-5) 12 Volt w/6' (1.83 m) leads with Deutsch connectors and 5/16" (.79 cm) mounting hardware. Solid stainless steel billet end,
Included in Heavy Duty PerformanceTab Kits
Stroke: 2-1/4" (5.72 cm)
Length overall: 11-3/8" (28.89 cm)
Length pin to pin: 10-3/4" (27.31)
Diameter (upper housing): 2-1/2" (6.35 cm)
Part # (Superseded #)
#15056-001 (101 XD-7) 12 Volt w/6' (1.83 m) leads with Deutsch connectors, and 3/8" (.95 cm) mounting hardware. Solid stainless steel billet end
Included in Extreme Duty Performance Kits, High Performance Trim Tab Kits and Super Strong Kits
Stroke: 2-1/4" (5.72 cm)
Length overall: 11-3/8" (28.89 cm)
Length pin to pin: 10-3/4" (27.31)
Diameter (upper housing): 2-1/2" (6.35 cm)
Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing
Corrosion proof Vandar mounts
Stainless steel ram won't flex, even under extreme loads
Double O-ring for maximum protection
Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutches
Self-locking ballscrew locks into position and will not drift
Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life
Tough, high-torque motor easily transfers 750 lbs
High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing
Corrosion proof Vandar cap and mount, stands up to severe loads
Part # (Superseded #)
#15055-001 (101 XD-5) 12 Volt w/6' (1.83 m) leads with Deutsch connectors and 5/16" (.79 cm) mounting hardware. Solid stainless steel billet end,
Included in Heavy Duty PerformanceTab Kits
Stroke: 2-1/4" (5.72 cm)
Length overall: 11-3/8" (28.89 cm)
Length pin to pin: 10-3/4" (27.31)
Diameter (upper housing): 2-1/2" (6.35 cm)
Part # (Superseded #)
#15056-001 (101 XD-7) 12 Volt w/6' (1.83 m) leads with Deutsch connectors, and 3/8" (.95 cm) mounting hardware. Solid stainless steel billet end
Included in Extreme Duty Performance Kits, High Performance Trim Tab Kits and Super Strong Kits
Stroke: 2-1/4" (5.72 cm)
Length overall: 11-3/8" (28.89 cm)
Length pin to pin: 10-3/4" (27.31)
Diameter (upper housing): 2-1/2" (6.35 cm)
Top cap gland seal sheaths the actuator cable outer jacket as well as both internal conductors for maximum waterproofing
Corrosion proof Vandar mounts
Stainless steel ram won't flex, even under extreme loads
Double O-ring for maximum protection
Ballscrew rotates freely on 12 ball bearings at both ends of its stroke so there's no need for complicated limit switches and clutches
Self-locking ballscrew locks into position and will not drift
Precision molded, powdered metal, high alloy gears provide high accuracy, high wear resistance, and high strength for long life
Tough, high-torque motor easily transfers 750 lbs
High-impact, ultraviolet resistant nylon 66, 50% glass fiber reinforced thermoplastic housing
Corrosion proof Vandar cap and mount, stands up to severe loads